Creo Simulate Tutorial Release 1.0 & 2.0

Structure / Thermal

Author: Roger Toogood

Publisher: SDC Publications

ISBN:

Category: Computers

Page: 296

View: 836

Creo Simulate Tutorial Releases 1.0 & 2.0 introduces new users to finite element analysis using Creo Simulate and how it can be used to analyze a variety of problems. The tutorial lessons cover the major concepts and frequently used commands required to progress from a novice to an intermediate user level. The commands are presented in a click-by-click manner using simple examples and exercises that illustrate a broad range of the analysis types that can be performed. In addition to showing the command usage, the text will explain why certain commands are being used and, where appropriate, the relation of commands to the overall Finite Element Analysis (FEA) philosophy are explained. Moreover, since error analysis is an important skill, considerable time is spent exploring the created models so that users will become comfortable with the “debugging” phase of modeling. This textbook is written for first-time FEA users in general and Creo Simulate users in particular. After a brief introduction to finite element modeling, the tutorial introduces the major concepts behind the use of Creo Simulate to perform Finite Element Analysis of parts. These include: modes of operation, element types, design studies (analysis, sensitivity studies, organization), and the major steps for setting up a model (materials, loads, constraints, analysis type), studying convergence of the solution, and viewing the results. Both 2D and 3D problems are treated. This tutorial deals exclusively with operation in integrated mode with Creo Parametric. It is suitable for use with both Releases 1.0 and 2.0 of Creo Simulate.

Creo Simulate 6.0 Tutorial

Author: Roger Toogood

Publisher: SDC Publications

ISBN:

Category: Computers

Page: 312

View: 565

Creo Simulate 6.0 Tutorial introduces new users to finite element analysis using Creo Simulate and how it can be used to analyze a variety of problems. The tutorial lessons cover the major concepts and frequently used commands required to progress from a novice to an intermediate user level. The commands are presented in a click-by-click manner using simple examples and exercises that illustrate a broad range of the analysis types that can be performed. In addition to showing the command usage, the text will explain why certain commands are being used and, where appropriate, the relation of commands to the overall Finite Element Analysis (FEA) philosophy are explained. Moreover, since error analysis is an important skill, considerable time is spent exploring the created models so that users will become comfortable with the “debugging” phase of modeling. This textbook is written for first-time FEA users in general and Creo Simulate users in particular. After a brief introduction to finite element modeling, the tutorial introduces the major concepts behind the use of Creo Simulate to perform Finite Element Analysis of parts. These include modes of operation, element types, design studies (analysis, sensitivity studies, organization), and the major steps for setting up a model (materials, loads, constraints, analysis type), studying convergence of the solution, and viewing the results. Both 2D and 3D problems are covered. This tutorial deals exclusively with operation in integrated mode with Creo Parametric. It is suitable for use with both Releases 6.0 of Creo Simulate. The tutorials consist of the following: • 2 lessons on general introductory material • 2 lessons introducing the basic operations in Creo Simulate using solid models • 4 lessons on model idealizations (shells, beams and frames, plane stress, etc) • 1 lesson on miscellaneous topics • 1 lesson on steady and transient thermal analysis

Introduction to Finite Element Analysis Using Creo Simulate 5.0

Author: Randy Shih

Publisher: SDC Publications

ISBN:

Category: Computers

Page: 436

View: 740

The primary goal of Introduction to Finite Element Analysis Using Creo Simulate 5.0 is to introduce the aspects of finite element analysis (FEA) that are important to engineers and designers. Theoretical aspects of finite element analysis are also introduced as they are needed to help better understand the operations. The primary emphasis of the text is placed on the practical concepts and procedures of using Creo Simulate in performing Linear Statics Stress Analysis; but the basic modal analysis procedure is covered. This text is intended to be used as a training guide for both students and professionals. This text covers Creo Simulate 5.0 and the lessons proceed in a pedagogical fashion to guide you from constructing basic truss elements to generating three-dimensional solid elements from solid models. This text takes a hands-on exercise intensive approach to all the important Finite Element Analysis techniques and concepts. This textbook contains a series of twelve tutorial style lessons designed to introduce beginning FEA users to Creo Simulate. The basic premise of this book is the more designs you create using Creo Simulate, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons.

Introduction to Finite Element Analysis Using Creo Simulate 3.0

Author: Randy Shih

Publisher: SDC Publications

ISBN:

Category: Computers

Page: 431

View: 290

The primary goal of Introduction to Finite Element Analysis Using Creo Simulate 3.0 is to introduce the aspects of finite element analysis (FEA) that are important to the engineers and designers. Theoretical aspects of finite element analysis are also introduced as they are needed to help better understand the operations. The primary emphasis of the text is placed on the practical concepts and procedures of using Creo Simulate in performing Linear Statics Stress Analysis; but the basic modal analysis procedure is covered. This text is intended to be used as a training guide for both students and professionals. This text covers Creo Simulate 3.0 and the lessons proceed in a pedagogical fashion to guide you from constructing basic truss elements to generating three-dimensional solid elements from solid models. This text takes a hands-on exercise intensive approach to all the important Finite Element Analysis techniques and concepts. This textbook contains a series of twelve tutorial style lessons designed to introduce beginning FEA users to Creo Simulate. The basic premise of this book is the more designs you create using Creo Simulate, the Better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons.

Creo Parametric 5.0 Tutorial

Author: Roger Toogood

Publisher: SDC Publications

ISBN:

Category: Computers

Page: 416

View: 473

The eleven lessons in this tutorial introduce you to the design capabilities of Creo Parametric 5.0. The tutorial covers the major concepts and frequently used commands required to advance from a novice to an intermediate user level. Major topics include part and assembly creation, and creation of engineering drawings. Also illustrated are the major functions that make Creo Parametric a parametric solid modeler. Although the commands are presented in a click-by-click manner, an effort has been made, in addition to showing/illustrating the command usage, to explain why certain commands are being used and the relation of feature selection and construction to the overall part design philosophy. Simply knowing where commands can be found is only half the battle. As is pointed out numerous times in the text, creating useful and effective models of parts and assemblies requires advance planning and forethought. Moreover, since error recovery is an important skill, considerable time is spent exploring the created models. In fact, some errors are intentionally induced so that users will become comfortable with the “debugging” phase of model creation. At the end of each lesson is a short quiz reviewing the new topics covered in that chapter. Following the quiz are several simple "exercise" parts that can be created using new commands taught in that lesson. In addition to these an ongoing project throughout the book is also included. This project consists of several parts that are introduced with the early lessons and finally assembled at the end.

Designing with Creo Parametric 5.0

Author: Michael Rider

Publisher: SDC Publications

ISBN:

Category: Computers

Page: 544

View: 184

Designing with Creo Parametric 5.0 provides the high school student, college student, or practicing engineer with a basic introduction to engineering design while learning the 3D modeling Computer-Aided Design software called Creo Parametric from PTC. The topics are presented in tutorial format with exercises at the end of each chapter to reinforce the concepts covered. It is richly illustrated with computer screen shots throughout. Above all, this text is designed to help you expand your creative talents and communicate your ideas through the graphics language. Because it is easier to learn new information if you have a reason for learning it, this textbook discusses design intent while you are learning Creo Parametric. At the same time, it shows how knowledge covered in basic engineering courses such as statics, dynamics, strength of materials, and design of mechanical components can be applied to design. You do not need an engineering degree nor be working toward a degree in engineering to use this textbook. Although FEA (Finite Element Analysis) is used in this textbook, its theory is not covered. The first two chapters of this book describe the design process. The meat of this text, learning the basic Creo Parametric software, is found in Chapters 3 through 6. Chapters 7, 8, and 12 deal with dimensioning and tolerancing an engineering part. Chapters 9 and 10 deal with assemblies and assembly drawings. Chapter 11 deals with family tables used when similar parts are to be designed or used. Chapter 13 is an introduction to Creo Simulate and FEA.

Creo Simulate 3.0 Structural and Thermal Analysis

Autodesk Authorized Publisher

Author: ASCENT - Center for Technical Knowledge

Publisher: Ascent, Center for Technical Knowledge

ISBN:

Category:

Page:

View: 783

This student guide covers the fundamentals of Creo Simulate: Structural and Thermal Analysis. It provides you with the knowledge to effectively use Creo Simulate for finite element analysis, thereby reducing design time. Many concepts apply to both Structure and Thermal analysis; a portion of this guide is specifically dedicated to Thermal analysis. This is an extensive hands-on training guide, in which you have the opportunity to apply your knowledge through real-world scenarios and examples. Topics Covered FEA Fundamentals: P-elements and analysis convergence methods Basic Modeling and Analysis Types of Loads and Constraints Idealizations: Shells and Beams Sensitivity and Optimization Studies Assembly Interfaces and Contact Analysis Thermal Analysis Modal Analysis Welds, Springs, and Masses Fasteners and Rigid Links Buckling Analysis Prerequisites Prior to taking this course, we recommend that users complete the Creo Parametric: Introduction to Solid Modeling student guide, plus complete a minimum of 80 hours of Creo Parametric experience.

Designing with Creo Parametric 6.0

Author: Michael Rider

Publisher: SDC Publications

ISBN:

Category: Computers

Page: 544

View: 947

Designing with Creo Parametric 6.0 provides the high school student, college student, or practicing engineer with a basic introduction to engineering design while learning the 3D modeling Computer-Aided Design software called Creo Parametric from PTC. The topics are presented in tutorial format with exercises at the end of each chapter to reinforce the concepts covered. It is richly illustrated with computer screen shots throughout. Above all, this text is designed to help you expand your creative talents and communicate your ideas through the graphics language. Because it is easier to learn new information if you have a reason for learning it, this textbook discusses design intent while you are learning Creo Parametric. At the same time, it shows how knowledge covered in basic engineering courses such as statics, dynamics, strength of materials, and design of mechanical components can be applied to design. You do not need an engineering degree nor be working toward a degree in engineering to use this textbook. Although FEA (Finite Element Analysis) is used in this textbook, its theory is not covered. The first two chapters of this book describe the design process. The meat of this text, learning the basic Creo Parametric software, is found in Chapters 3 through 6. Chapters 7, 8, and 12 deal with dimensioning and tolerancing an engineering part. Chapters 9 and 10 deal with assemblies and assembly drawings. Chapter 11 deals with family tables used when similar parts are to be designed or used. Chapter 13 is an introduction to Creo Simulate and FEA.

Mechanism Design and Analysis Using PTC Creo Mechanism 6.0

Author: Kuang-Hua Chang

Publisher: SDC Publications

ISBN:

Category: Computers

Page: 178

View: 876

Mechanism Design and Analysis Using PTC Creo Mechanism 6.0 is designed to help you become familiar with Mechanism, a module of the PTC Creo Parametric software family, which supports modeling and analysis (or simulation) of mechanisms in a virtual (computer) environment. Capabilities in Mechanism allow users to simulate and visualize mechanism performance. Using Mechanism early in the product development stage could prevent costly redesign due to design defects found in the physical testing phase; therefore, it contributes to a more cost effective, reliable, and efficient product development process. The book is written following a project-based learning approach and covers the major concepts and frequently used commands required to advance readers from a novice to an intermediate level. Basic concepts discussed include model creation, such as body and joint definitions; analysis type selection, such as static (assembly) analysis, kinematics and dynamics; and results visualization. The concepts are introduced using simple, yet realistic, examples. Verifying the results obtained from computer simulation is extremely important. One of the unique features of this textbook is the incorporation of theoretical discussions for kinematic and dynamic analyses in conjunction with simulation results obtained using Mechanism. The theoretical discussions simply support the verification of simulation results rather than providing an in-depth discussion on the subjects of kinematics and dynamics.

Computer Aided Virtual Manufacturing Using Creo Parametric

Easy to Learn Step by Step Guide

Author: Paul Obiora Kanife

Publisher: Springer

ISBN:

Category: Technology & Engineering

Page: 640

View: 686

Providing a step-by-step guide for the implementation of virtual manufacturing using Creo Parametric software (formerly known as Pro-Engineer), this book creates an engaging and interactive learning experience for manufacturing engineering students. Featuring graphic illustrations of simulation processes and operations, and written in accessible English to promote user-friendliness, the book covers key topics in the field including: the engraving machining process, face milling, profile milling, surface milling, volume rough milling, expert machining, electric discharge machining (EDM), and area turning using the lathe machining process. Maximising reader insights into how to simulate material removal processes, and how to generate cutter location data and G-codes data, this valuable resource equips undergraduate, postgraduate, BTech and HND students in the fields of manufacturing engineering, computer aided design (CAD) and computer aided engineering (CAE) with transferable skills and knowledge. This book is also intended for technicians, technologists and engineers new to Creo Parametric software.