Product Lifecycle Management in the Era of Internet of Things

12th IFIP WG 5.1 International Conference, PLM 2015, Doha, Qatar, October 19-21, 2015, Revised Selected Papers

Author: Abdelaziz Bouras

Publisher: Springer

ISBN:

Category: Business & Economics

Page: 877

View: 191

This book constitutes the refereed proceedings of the 12th IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2015, held in Doha, Qatar, in October 2015. The 79 revised full papers were carefully reviewed and selected from 130 submissions. The papers are organized in the following topical sections: smart products, assessment approaches, PLM maturity, building information modeling (BIM), languages and ontologies, product service systems, future factory, knowledge creation and management, simulation and virtual environments, sustainability and systems improvement, configuration and engineering change, education studies, cyber-physical and smart systems, design and integration issues, and PLM processes and applications.

Springer Handbook of Mechanical Engineering

Author: Karl-Heinrich Grote

Publisher: Springer Science & Business Media

ISBN:

Category: Science

Page: 1580

View: 554

This resource covers all areas of interest for the practicing engineer as well as for the student at various levels and educational institutions. It features the work of authors from all over the world who have contributed their expertise and support the globally working engineer in finding a solution for today‘s mechanical engineering problems. Each subject is discussed in detail and supported by numerous figures and tables.

Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology

Author: George Q. Huang

Publisher: Springer Science & Business Media

ISBN:

Category: Mathematics

Page: 1803

View: 797

This Proceedings volume contains articles presented at the CIRP-Sponsored Inter- tional Conference on Digital Enterprise Technology (DET2009) that takes place December 14–16, 2009 in Hong Kong. This is the 6th DET conference in the series and the first to be held in Asia. Professor Paul Maropoulos initiated, hosted and chaired the 1st International DET Conference held in 2002 at the University of D- ham. Since this inaugural first DET conference, DET conference series has been s- cessfully held in 2004 at Seattle, Washington USA, in 2006 at Setubal Portugal, in 2007 at Bath England, and in 2008 at Nantes France. The DET2009 conference continues to bring together International expertise from the academic and industrial fields, pushing forward the boundaries of research kno- edge and best practice in digital enterprise technology for design and manufacturing, and logistics and supply chain management. Over 120 papers from over 10 countries have been accepted for presentation at DET2009 and inclusion in this Proceedings volume after stringent refereeing process. On behalf of the organizing and program committees, the Editors are grateful to the many people who have made DET2009 possible: to the authors and presenters, es- cially the keynote speakers, to those who have diligently reviewed submissions, to members of International Scientific Committee, Organizing Committee and Advisory Committes, and to colleagues for their hard work in sorting out all the arrangements. We would also like to extend our gratitude to DET2009 sponsors, co-organizers, and supporting organizations.

ISA 88 and ISA 95 in the Life Science Industries

Author: WBF

Publisher: Momentum Press

ISBN:

Category: Technology & Engineering

Page: 220

View: 163

The ISA (International Society of Automation) standards 88 and 95 are manufacturing standards established in the late 1990s and periodically updated by the governing bodies responsible for them - the ISA and the WBF (World Batch Forum). The two standards set up protocols and uniform specifications for batch control systems, including types of control equipment, design of control systems and interpretation of batch control data. ISA 88 and 95 are explained in the context of the pharmaceutical and medical industries. Examples of such batch processing procedures as fermentation, separation, and refinement are discussed and how the two standards affect the design of facilities and systems for performing these procedures. It features: How to set up a pharmaceutical module library using ISA 88 and how to implement ISA 88 across life Science Development Operations Understanding Product life cycle batches Case Studies on Risk-based engineering assessment and qualifications, a SCADA upgrade project, and more

Proceedings of DETC

Author: American Society of Mechanical Engineers. Design Engineering Division

Publisher:

ISBN:

Category: Engineering design

Page: 1220

View: 795

Glocalized Solutions for Sustainability in Manufacturing

Proceedings of the 18th CIRP International Conference on Life Cycle Engineering, Technische Universität Braunschweig, Braunschweig, Germany, May 2nd - 4th, 2011

Author: Jürgen Hesselbach

Publisher: Springer Science & Business Media

ISBN:

Category: Technology & Engineering

Page: 689

View: 136

The 18th CIRP International Conference on Life Cycle Engineering (LCE) 2011 continues a long tradition of scientific meetings focusing on the exchange of industrial and academic knowledge and experiences in life cycle assessment, product development, sustainable manufacturing and end-of-life-management. The theme “Glocalized Solutions for Sustainability in Manufacturing” addresses the need for engineers to develop solutions which have the potential to address global challenges by providing products, services and processes taking into account local capabilities and constraints to achieve an economically, socially and environmentally sustainable society in a global perspective. Glocalized Solutions for Sustainability in Manufacturing do not only involve products or services that are changed for a local market by simple substitution or the omitting of functions. Products and services need to be addressed that ensure a high standard of living everywhere. Resources required for manufacturing and use of such products are limited and not evenly distributed in the world. Locally available resources, local capabilities as well as local constraints have to be drivers for product- and process innovations with respect to the entire life cycle. The 18th CIRP International Conference on Life Cycle Engineering (LCE) 2011 serves as a platform for the discussion of the resulting challenges and the collaborative development of new scientific ideas.

Manufacturing Engineering Handbook, Second Edition

Author: Hwaiyu Geng

Publisher: McGraw Hill Professional

ISBN:

Category: Technology & Engineering

Page: 880

View: 728

The new edition of this professional resource reveals how to optimize all aspects of the global manufacturing process to build the highest quality goods at the lowest price in the shortest possible time. How can one apply technical and business knowledge to develop a strategic plan that delivers increased productivity, quality, sustainability, reliability, agility, resilience, and best practices with rapid time to production and value? The answers are found in the fully updated new edition of Manufacturing Engineering Handbook. The goal of this second edition is to provide the essential knowledge needed to build products with the highest quality at the lowest cost in the least amount of time by optimizing all aspects of the manufacturing process—design, development, tools, processes, quality, speed, output, safety, and sustainability. You will gain access to information on conventional and modern technologies, manufacturing processes, and operations management that will assist you in achieving these goals. The book is written by a team of more than 100 internationally renowned manufacturing engineering experts, and pared down from its original 1200 pages. The new and vastly improved second edition is specifically designed to concisely and succinctly cover traditional manufacturing processes and advanced technologies as well as newer manufacturing software and systems to integrate them into the modern, global manufacturing world. Brand-new chapters on: eco-design and sustainability; nano materials and nano manufacturing; facilities planning; operations research New sections on plastics, composites, and moldmaking; global manufacturing and supply chain management Increased coverage of Design for Six Sigma and adaptive manufacturing Affiliated web site with color illustrations, graphs, charts, discussions on future trends, additional technical papers, and suggestions for further reading